Icer Extraction Bags 3-Part Outdoor

The Pure Factory outdoor set consists of three bags with a screen thickness of 185mü and 70mü and 38mü with a diameter of about 30cm.

These bags are ideal for processing plant residues with smaller resin glands. While the coarser bag holds back the plant residues, the finer ones filter out the resin crystals that get stuck in the sieve. Extraction with the extraction bags is a cost-effective and simple variant for the production of resinous extracts without great effort. Always make sure that the coarsest bag is on top and the finest on the bottom.

Application:

With resinator: Fix the extraction bags in a cauldron. First put the fine-meshed bag in the kettle. You place the coarse mesh in the fine mesh. Wash the plant debris in the resinator for 15 minutes. Drain the water into the prepared kettle. First take out the rough bag and squeeze out the water well. Put this in a separate kettle. Now take out the fine bag and squeeze out the water well. Remove the remaining extract and distribute it on a clean, dry surface, as airy as possible. Let the resin dry for at least 48 hours. Taste always comes with the times. You can also use the plant remains from the coarse sieve for further use. However, this has a lower purity.

Without resinator: Prepare the bags as described above. Fill a separate kettle approximately halfway with cold water. Now pour about 2 kilos of broken ice into the water. Put the plant remains in the water. Stir the water well and several times. You can also use a blender, as long as it doesn't puree the plant residues. Now pour the water into the prepared bag kettle and continue as described above.